|
Taking the voltage stabilization and purification as the integral part, this stabilizer adopts the sinusoidal energy-distribution voltage stabilization technology. It provides the features of high precision in voltage stabilization, quick speed in dynamic response, to electromagnetic interference. It can also properly absorb and control the noises and peak voltage of electrified wire netting.
Adept stabilizer high-power full-automatic compensating power voltage stabilizers. Compared with other stabilizers, this product has the advantages of large capacity, high efficiency, no waveform distortion, and stable voltage control. Furthermore, it owns wide service load and capacity of momentary overload, long-term continuous operation, and manual and automatic operation switch. Meanwhile, it has the protection against over voltage, over current, phase shortage, as well as phase-sequence and automation protection. Adept stabilizer high capability fully automatic AC voltage stabilizer fully automatic AC voltage stabilizer consists of contact voltage regulator, sampling control circuit and servo motor. When input voltage or load change, the sampling control circuit will sample and amplify the voltage, and the servo motor will rotate in the desired direction, which turns the arm and adjusts voltage until the output voltage is regulated into the rated output voltage.
Design Features |
| A complete solid state design. |
| Automatic high/low cut facility with auto reset. |
| Fast rate of correction 36 Volts/Sec. |
| Short-circuit protection |
| Overload protection. |
| Output error is less than 95%. |
| Efficiency is greater than 95%. |
| Waveform ( sine wave )distortion is zero. |
| Visual warning with LED's against very high & very low input Voltages. |
| Performance unaffected by load power factor. |
|
Single Phase |
Three Phase |
Input A.C. |
: 170 V to 270 VAC |
: 300 V to 460 VAC |
Output |
: 230 VAC ± 3% |
: 415 VAC ± 3% |
Frequency |
: 50 Hz. |
: 50 Hz. |
Phase |
: Single |
: Three |
Volt Correction |
: 32 Volt/sec. |
: 32 Volt/sec. |
Line Regulation |
: ± 3% |
: ± 3% |
Load Regulation |
: ± 3% |
: ± 3% |
| Load Capacity |
100% Full Time |
100% Full Time |
Over Load Capacity |
: 120% for 1 minute. |
: 120% for 1 minute. |
Capacity
Environmental Condition
Control System
Cooling System
Temperature CO-Efficient |
5 KVA to 1500 KVA in both the models 10° C to 45° C.
Servo Control
Air/oil/Natural Cooled:
0.025% per / o C in the range 0-70 0 C. |
: 10° C to 45° C.
: Servo Control
: Air/oil/Natural Cooled
: 0.025% per / o C in
the range 0-70 0 C.
|
Protection: Over voltage protection, Under voltage protection, protection, Short circuit protection, Delay of about 15 Sec. to resist quick. “ OFF-ON” of the machine
Auto Start : The Voltage stabilizer will remain effective within the range of 280V-480 VAC and will supply proper output as per your equirement beyond this limit, it will trip the machine. As soon as the supply voltage comes within the range, it automatically starts again.
Waveform Distortion : The voltage stabilizer will be supply output voltage of pure sin wave.
Load Power Factor Effect : The voltage stabilizer is designed in such a manner that it has no effect on system power factor.
Efficiency & Regulation : The stabilizer have efficiency better than 95% at full load and voltage regulation of +/-3% from specified voltage from no load to full load. |
